Steintec Slurry Primer is designed to create the strong, sustainable bond required when laying low or non-porous patio slabs such as porcelain and will help to enhance the adhesion bond between the paving and bedding mortar. Easy to apply, simply brush the slurry onto the underside of each paving slab prior to laying.

Porcelain paving has a very low water absorption value, meaning that the paving tile will not draw moisture to the same degree as other paving materials. This means that your porcelain paving will help to resist stains and stay clean but it also means that the paving will absorb almost nothing from the bedding mortar and concequently, without help, porcelain will not form a strong bond to the mortar bed. Can also be used on natural stone paving slabs to form a better bond to the mortar and reduce the potential for "picture frame" stains and cement patches being drawn up through the stone. Sold in a 12.5kg tub that will cover approximately 8-10m².

Any questions?

Please let us know if you’ve got any more questions about Pavestone Slurry Primer or any of our other products and services. Remember, you can come and visit us at one of our three showrooms in Swindon, Yarnton or Oxford where we have friendly and knowledgeable staff on hand to help you with any landscaping queries you may have. You can find your local branch here! 

Free delivery!

At AWBS we’re very proud of our ability to offer fast, free local delivery by our own fleet of vehicles and trained delivery drivers. Not sure if you qualify for free delivery in your area? Look no further than our handy postcode checker which will let you know!